Phytosensing and phytoactuating system

The system for measuring physiological and electrophysiological reactions of phyto-objects (productive and home plants, herbs, shrubs, trees, mosses, algae, fungi, mold; for yeasts -- see the biosensor) is based on CYBRES MU module and intended for analysing and monitoring responses of phyto-objects to external stimuli. The system measures:

  1. Biopotentials (2 channels)
  2. Tissue conductivity at different frequencies (2 channels)
  3. The frequency shift in tissue response (2 channels)
  4. Leaf transpiration (single channel)
  5. Stem's sap flow (signle channel)
  6. Environmental parameters: 3D accelerometer/magnetometer, EM power meter, air temperature and humidity, pressure, light (on external sensor panel, available in set)
  7. Supported external sensors: CO2, O2, soil humidity, ion-selective electrodes, any sensors with I2C interface

Functions with two channels enable performing high-resolution differential measurement. Real-time data (with time stamps) can be recorded into the internal flash memory, transmitted via USB or Bluetooth to a computer, or written as html-pages for the online data plot in internet. The needle- or surface- electrodes are used to receive signals from plants. The system is fully autonomous and can operate without user intervention.

In addition to phytosensing, the device can also perform phytoactuation, i.e. to execute real-time data processing and decision making for operating different actuators. This functionality is useful for electrical or light stimulation of plants (blue/red light stimulation), optimizing watering and lighting mode, conducting fully autonomous experiments and development of complex feedback-based and adaptive scenarios with bio-hybrid systems. It possesses built-in semiconductor relays (switches) e.g. for RGB LEDs or water pumps, and can actuate any external USB relays. The system implements dynamical mapping between embedded signal detectors, numerical processors and actuators with reactive, probabilistic and homeostatic decision mechanisms. The phytosensor is a part of CYBRES bio-hybrid interface devices.

Applications. This system is designed for professional and amateur purposes, as a tool for biological laboratories, and for plant enthusiasts. In the professional use this system can be employed to study the electrical reaction of plants, as phyto- or bio-sensors, in the bio-hybrid and robotic systems, for biotechnological processes based on phyto-objects. Additional algorithms for data analysis and actuation can be easily implemented with the provided script language. In amateur applications the system has a variety of potential usages, for example, in school or university courses on biology, for studying 'the electrical language of plants', or to carry out experiments in the context of Cleve Backster and Peter Tompkins works with the 'Secret life of plants'.

The phytosensor is offered in three different versions:

  1. In the minimal version, users receive access to all electrophysiological functions, can record, analyse and perform phytoactuation based on electrical responces. There are several pre-programmed behaviours such as 'singing plants' or 'talking plants' - converter of biosignal to music and speech. Users can flexibly program reactions and voice dialogue. Plants are very sensitive to a touch and 'presence' of a person, maybe that the flower will be able to recognize you and 'express a joy' about your arrival. The delivering set includes the MU3.4 module, bio-potential/tissue-conductivity electrodes and the sensor panel with several environmental sensors.
  2. In the extended configuration, the system is configured as an indicator of biological pathogenicity of the environment. It can measure separate parameters (e.g. CO2 or EM emission level) or a 'complex biological pathogenicity' - a combination of different parameters that affect the metabolism (e.g. geobiological situation and cosmobiological factors). The system needs about one-two weeks to adapt to the plant, its signals and to calculate the correlations with other sensors. For instance, the green LED indicates a normal signal level of the plant, yellow - the deviation of current parameters from a 'normal', red - the critical state. The main purpose of this system is to attract attention to possible biological pathogenicity on early stage. In this configuration the phytosensor is capable to operate without a connected PC/laptop. The delivering set includes the MU3.4 module, bio-potential/tissue-conductivity electrodes, the leaf transpiration sensor, and the senor panel with several environmental sensors.
  3. In the configuration for professional users, the device provides access to all obtained data and allows their algorithmic, mathematical and statistical analysis. This mode is useful for optimization of plant's productive functionality, for using plants as biosensors, including weak signals, human psycho-emotional influences and unconventional instrumental detectors, as well as for scientific research of the world of plants. In particular, it can be used to explore the leanring and adaptation processes in vegetable and bio-hybrid systems based on plants. The delivering set includes the MU3.4 module, bio-potential/tissue-conductivity electrodes, the leaf transpiration sensor, the stem's sap flow sensor, and the senor panel with several environmental sensors. Optional electrodes in this version include electrodes for trees/shrubs. In this configuration the phytosensor is capable to operate without a connected PC/laptop also outside (with IP65/66 water protected package).

Main parameters:

Electrophysiology  
Resolution of biopotentials (input current) ±64nV (±70pA)
The potential for electrical stimulation and measurement of tissue conductivity ±10mV - ±1B
The frequencies of electrical stimulation and measurement of tissue conductivity 8Hz - 0.3MHz (max. 0.65MHz)
Physiology  
Leaf transpiration (in configuration II) relative measurement,
separate calibration
Stem's sap flow (in configuration III) relative measurement,
separate calibration
Additional built-in sensors (MU3.4)  
RF power meter (chip LT5534) 50Mhz-3Ghz
absolute barometric pressure (chip BMP280) 300...1100 hPa (resol. 0.01 hPa )
3D accelerometer/magnetometer (chip LSM303D) ±2--±12 gauss full scale
Additional external sensors  
air/soil temperature (chip LM35) on sensor panel I 10mV/C conversion
air humidity (chip HIH-5031-001) on sensor panel I 23.5mV/%
light sensor on sensor panel I 0-1000 Lux
soil humidity on sensor panel II separate calibration
CO2/O2 sensors on sensor panel III (external modules)  
Actuators  
MOSFET 3x separate channels max. 1A continuous current
MOSFET 2x with thermostat functionality (also as a current source) max. 1A continuous current
programmable switch 3.3V 0.2A
external USB relays (up to 128 relays) e.g. 24-330V up to 16A
voice, sound, twitter, electrostimulation (see the manual)  
Other parameters  
Intervals between measurements 0.1sec - 100 seconds
Internal flash memory 512MB

Real time clock with separate lithium battery

 
Analysis FFT, FRA, frequency shift, differential measurements, linear regression, spectral and statistical analysis, additional numerical processors available
Connectivity I2C, USB (main channel), Bluetooth (optional, integrated), WiFi/GSM (optional, external)
Packaging EM shield. alluminium package 95x70x24mm, (IP65/66 cover package optional)
Power supply USB, 5V (optional: solar cells, USB power banks)

Manuals and publications

 

Images

 

Videos

Мое имя Флора. Я растение. от CYBRES на Rutube.